We are Manufacturer, Exporter and Supplier of Self Reinforced Nozzles & Hollow Forgings.
What are Self Reinforced Nozzles ?
When referring to self-reinforced nozzles, it is generally assumed that the reinforcement to withstand the loads that affect the nozzle will be a constitutive part of the nozzle. This means that self-reinforced nozzles do not need auxiliary elements (like built up nozzles) to withstand design conditions and external loads.
On a practical level, self-reinforced nozzles are those that do not have any additional kind of reinforcement (pad) attached, and all the welds between its own components and between the nozzle and the vessel are full penetration type. Because of that, these nozzles could be named integrally reinforced as well.
RSEP manufactures self reinforced nozzles (SR Nozzles) with plain end as well as with complex profiling in fully machined condition for Pressure Vessels designed to ANSI, ASME codes in all steel grades. Nozzles, hollow forgings and self reinforced nozzles are offered, in carbon steel, alloy steel, stainless steel and duplex steel as per capacity mentioned below:-
- Diameter – 2500 mm Maximum
- Weight – 5000 kgs Maximum
In machinery designed to withstand untold amounts of pressure, having access to quality self-reinforced nozzles is extremely important. These are nozzle necks specifically designed and forged with an extra heavy wall, attached to the thinner end of the piping.
Basically, in operations of heavy pressure, a self-reinforced nozzle head cuts out the burden of reinforcing the nozzle or piping with additional plating or added forgings, making for a more cost-effective yet structurally sound solution.
Whether plain or beset with more complex profiling, our SR nozzles here at RSEP are made with durability kept foremost in mind. Through all of our steel grades, we uphold the quality and safety standards described in ANSI and ASME codes for pressure vessel systems, so you can be rest assured that the hollow forgings you order from us are always rated top-notch in longevity.
We place more importance in the strength and quality of our product than in any other aspect of our business – not just because we pride ourselves in the great work that we do, but also because we understand that the products we forge play integral roles in machinery and equipment that countless people rely on.
Here at RSEP we do not take any order lightly – whether it is the construction of an entire aluminum ring for use in a large aerospace project, or the forging of a relatively small self-reinforced nozzle, every single piece of alloyed equipment gets our full and undivided attention throughout the crafting process.
Depending on what kind of project you have in mind, our self-reinforced nozzle production is customizable per customer specification. From exact dimensions, to a specific steel type – duplex steel, carbon steel, alloy steel, stainless steel, to name just a few possible alloys – every individual project requires a different set of exact specifications, and we here at RSEP are ready to cater to any and all of them.
If what you are looking for is a reputed and experienced forgings manufacturer, with the expertise needed to fulfill your orders to the letter, then we at RSEP are your ideal forging solution.
Types of configurations of self-reinforced nozzles are as fallow.
The most commonly used are the mentioned as follows: Long Welding Neck (LWN) or straight hub, variable hub thickness, and nozzles manufactured using a standardized thickness pipe.
Intuitively, it could be noted that usually self-reinforced nozzles imply an increase in the cost with respect to a non-self-reinforced type nozzle. Therefore, the reasons that lead the designer to choose one specific type among all the possibilities must be reasoned and fully scrutinized.
These reasons could depend on various factors such as pressure, temperature, the presence of variable loads (fatigue), high external loads consequence of being connected to a pipe, etc. Usually the requirements for the use of self-reinforced nozzles are included in the job specification belonging to the owners of industrial plants where those nozzles are in service or, on occasions, these requirements can be indicated in the licensor specification if applicable.
Due to the mentioned above, it is not possible to establish specific criteria regarding when to use this type of nozzles for all cases, but only some general guidelines that should be used as a first approach to consider in which scenarios self-reinforced nozzles should be considered as a design solution. Scenarios such as those in which design conditions include following effects are conducive to have to choose self-reinforced nozzles: the studied component must withstand variable loads (fatigue), tangential or inclined nozzles with respect to the vessel where nozzles are attached, lethal service, high pressure, high temperatures or pressure vessels with high thicknesses.
As already indicated, self-reinforced nozzles often go hand in hand with severe or critical service conditions. Because of it, it is convenient to mention that for this special kind of nozzles stress concentrators must be eliminated as much as possible.
For some design codes, the design and calculation criteria for self-reinforced nozzles and built up nozzles are not always the same. Requirements are more conservative for the latter case. As an example, consider the screening study of the ASME Section VIII Division 2, procedure to determine if a fatigue analysis is required. If a given equipment or any of its components is of integral configuration, it can withstand a higher number of variable loads than a non-integral configuration equipment, without being necessary to verify its strength against fatigue loads by means of a specific calculation.
Going back to the economic issue, even if it is totally clear that self-reinforced nozzles are the ideal solution for a given case, it should be considered that some self-reinforced nozzles configurations are fabricated from forged material. This means high economic costs, reason for which it is very important to optimize the design so that the cost does not increase excessively.
We are World Wide Service Provider.
We Manufacturer, Fabricator, supplier and exporter of Self Reinforced Nozzles & Hollow Forgings in MIDDLE EAST: Saudi Arabia, Iran, Iraq, Uae, Qatar, Bahrain, Oman, Kuwait, Yemen, Syria, Jordan, Cyprus, AFRICA: Morocco, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Tunisia, Uganda, Ghana, Senegal, Liberia, NORTH AMERICA: USA, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad and Tobago, Jamaica, Bahamas, Denmark, EUROPE: Russia, Norway, Germany, France, Italy, Uk, Spain, Ukraine, Netherland, Belgium, Greece, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Bulgaria, Turkey, Montenegro, Romania, Azerbaijan, Czech Republic, ASIA: India, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Peru